There are a couple of reasons for this type of compressor failure:
• Piston seal has been compromised, which means the piston is still moving, however the pressure cannot be build,
• Reed valves are broken, which means the compressor is building pressure momentarily, however the pressure cannot be contained due to the valves being broken
在一个situation similar with the one described above you need to replace the compressor with a functional unit, and replace the inlet filter.
There are a couple of reasons for this type of failure:
•系统中有空气泄漏，防止压缩机构建空气压力
• Reed valves inside the compressor are starting to fail. They do not provide the sealing needed
•由于机械原因，防止簧片阀门关闭和密封空气积聚
Dirt in the air system that is getting embedded between the read valve the cylinder head
在一个situation similar with the one described above you can fix the system by fixing the air leak or replace the compressor with a functional unit, and replace the inlet filter.
The air system developed by PacBrake produces air pressure which is regulated by using an air pressure switch.
Pressure switch function is to shut down the compressor once the pressure goes beyond the upper limit.
If the pressure switch malfunctions the compressor might be in a situation to build pressure continuously.
压缩机连续运行将造成由于该过程中的高温而产生的潜在危险情况。
In case you are experiencing a situation where the compressor is running continuously you need to disconnect the compressor from the power source.
There are a several reasons a compressor would not run.
需要先检查电源，地面和保险丝。
压力开关失效，不允许压缩机打开。
在一个situation similar with the one described above you can fix the system checking power and ground to be proper or by replacing the pressure switch with a functional unit
325 Compressor type can be used as an air source for an exhaust brake or for an air suspension system
425 Compressor can be used for tire inflation, for an exhaust brake and for an air suspension system
625 Compressor is the largest compressor produced by Pacbrake. It has large array of applications and configurations. In certain configurations, it can be used with air tools, tire inflation, exhaust brakes and air suspension systems
您可以通过在所有配件上进行SOAP测试来检查系统中的泄漏。您所需要的只是在所有连接和配件上喷洒肥皂和水的混合物。如果有空气逃逸（以气泡的形式），如果需要，检查配件并用密封剂密封它们，或者重新扭转配件。重新测试系统，直到看到没有泄漏。
Pacbrake’s HP625 series compressors is an extremely powerful compressor capable of building high pressure and a very respectable flow rate. The compressor is extremely efficient at building pressure and maintaining pressure after the compressor is shut down. Any attempt to start the compressor would be difficult since the first compressor stroke would have to fight against a high pressure already in the system. Usually this condition would create a spike in power draw that can burn the motor and damage the compressor. Pacbrake has designed an unloader block that is releasing pressure in the system to allow the first compressor stroke to go unchallenged.
All air compressors are built with a duty cycle rating. This rating is typically given as a percentage of the amount of time that an air compressor can be run in a full cycle, typically, that includes the compressor’s run time and rest time at 100 PSI, and a standard ambient temperature of 72° F.
注册您的产品保修这里.
